How to Inspect a Home Like a Pro (Before It’s Too Late)
So, you’re about to buy a house. Congrats! But hold on—before you sign that paperwork, you need to make sure the place isn’t hiding any ugly surprises. I’ve been through this process a few times, and I’ll tell you straight: a home inspection is like a first date. You want to see past the surface and figure out if there’s real potential… or if it’s a disaster waiting to happen. Let me walk you through how to inspect a home like a pro, step by step.
1. Start By Researching the Inspector
First things first: not all home inspectors are created equal. I learned this the hard way when my first inspector missed a leaky roof that cost me thousands later. Now, I always check reviews online and ask friends for recommendations. Look for someone certified and experienced. If they’re willing to explain their process upfront, that’s a good sign. A pro inspector won’t just check boxes—they’ll treat your future home like their own.
2. Clean and Declutter Like Your Life Depends On It
You might think, “Why clean if the inspector is just going to poke around?” Here’s the thing: clutter hides problems. I once missed a cracked tile in my bathroom because a pile of towels was in the way. Clear out closets, move furniture away from walls, and sweep floors. This isn’t just about making the inspector’s job easier—it’s about making sure you can see every inch of the house, too.
3. Check the Roof (Yes, Literally Climb Up There)
Roofs are sneaky. From the ground, they might look fine, but up close? Not so much. Bring a ladder and inspect for missing shingles, sagging areas, or moss buildup. I found a bird’s nest clogging a gutter once—that’s a fire hazard waiting to happen. If you’re not comfortable climbing, use binoculars. A damaged roof can lead to leaks, mold, and rot. Trust me, you don’t want that.
4. Test Every Faucet, Shower, and Toilet
Plumbing issues are the worst. They’re messy, expensive, and often hidden. Turn on all taps and flush toilets to check water pressure and drainage. Look under sinks for stains—that’s a sign of past leaks. Oh, and don’t forget the water heater. If it’s rusty or making weird noises, it might need replacing soon. I once saved myself a $1,200 bill by catching a corroded pipe during an inspection.
5. Inspect Electrical Systems (Even If You’re Not an Electrician)
This part scares a lot of people, but it’s simpler than you think. Open the circuit breaker and make sure labels are clear (like “kitchen lights” or “living room outlets”). Test outlets with a phone charger. If lights flicker when you plug something in, that’s a red flag. Old wiring can be a fire risk. I once saw a house where the previous owner used extension cords as permanent wiring. Yikes.
6. Look for Signs of Mold and Mildew
Mold isn’t just gross—it’s dangerous. Check corners of rooms, windowsills, and basements. That musty smell? It’s a clue. I found black mold behind a shower curtain once. The seller claimed it was “just dirt,” but a moisture meter proved otherwise. If you see discoloration on walls or ceilings, ask the inspector to test it. Better safe than sorry.
7. Examine Windows and Doors for Drafts
Energy efficiency matters. Hold a piece of paper near windows and doors. If it flutters, there’s a draft. Check caulking around frames, too. Old windows might need replacing, which isn’t cheap. I once walked into a house where the front door wouldn’t close properly. The seller said it was “charming.” Spoiler: It wasn’t.
8. Don’t Skip the Attic and Basement
These spaces tell you a lot about the home’s structure. In the attic, look for insulation gaps or water stains. In the basement, check for cracks in walls or floors. A small crack might be normal, but horizontal cracks can mean foundation issues. I’ve seen basements with standing water after rain—that’s a grading problem you’ll want to fix.
9. Test Appliances (Even If They’re “New”)
If the stove, fridge, or dishwasher come with the house, test them. Run the dishwasher. Light the stove. Does the fridge make strange noises? I once moved into a place where the oven didn’t heat past 300°F. The seller had no idea. Lesson learned: always double-check.
10. Walk the Property After Rain
This is a pro tip. Visit the house after a storm. Are there puddles near the foundation? That means poor drainage, which can lead to basement flooding. Check the yard for erosion or uneven grading. I once saw a backyard that turned into a swamp every time it rained. The fix? A $5,000 sump pump installation.
11. Ask About Past Repairs
Sellers aren’t always upfront. Ask for records of repairs and renovations. If they replaced the roof in 2020, ask for receipts. I once found out a “new HVAC system” was actually 15 years old. The seller had “forgotten” to mention it.
12. Trust Your Gut
Finally, listen to your instincts. If something feels off, it probably is. I almost ignored a weird smell in a basement, but I pushed the inspector to check it out. Turns out, there was a dead raccoon in the wall. Gross? Yes. But better to know before moving in.
Taking Action Before It’s Too Late
Inspecting a home isn’t just about ticking boxes. It’s about protecting your investment—and your safety. The more you know, the better decisions you’ll make. So grab a flashlight, put on your detective hat, and don’t be afraid to ask questions. Your future self will thank you.